Step 2:
Insert collimator into body assembly

Screw and washer one

Screw and washer two

Step 3:
Install rear eyepiece

Put the o-ring in the track

Place the bulbs in the sockets. This is for seeing when the built in IR illuminator is turned on.

Both in place

And then attach the rear eyepiece with the 8 screws

Step 4:
Place image intensifier tube in socket

You will notice that there is only one correct way it can go in

Step 5:
Install front objective lens

The smaller o-ring goes in the smaller track (duh!)

Now, you will observe here that it is slightly crooked. The first attempt did not cross thread it, but actually the threads never met. The o-ring kept the threads from meeting and prevented the tube from being pushed far enough in to be powered on. With a second attempt it worked fine.

YAYYY! Second generation blemishes! But for the price I won't complain.

And looking outside with snow on the ground. I've never been good with taking pics through NV.

So, overall I ended up with:
a.) a beater NVG
b.) something I can sell for what I paid in the future
c.) a potential host for a Gen 3 tube in the future

Goodnight!

>>16689
Might want to start shopping for an IR laser too. That would complete your set-up. They even make good PEQ-15 clones now.

Unlike your nods, this one won't really wear out from use, so it will work for when you upgrade.

https://tnvc.com/shop/l3-insight-atpial-c-class1-ir-laser/

I'm sure there are cheaper options out there.

I have nothing to add, just wanted to say it's a cool build.

I got some more tubes in today. At the price I won't complain for them being Omni III tubes. I'll post some more pics later.

>>16769
Where does one find these miscellaneous parts?

>>16769
Do tell.

This is relevant to my interests. I would also like to know how to do this and obtain these components.
Between ITAR and the weak Syrupdollar, nightvision is a pipedream for me at this point.

Don't want to add to scarcity, but color me way interested in this too.

Your step by step pictures are a huge help, but is there a detailed guide that helps one understand the function of what he's screwing into what and the consequences for fucking up said sequence?

>>16778
>>16779
eBay

>>16782
There are Gen 2 NVGs that are legally exportable from the US.

>>16783
I don't have a detailed guideline, I just did it from experience with my other PVS-7 that I had to send in to get some wires soldered.

>>16789

If you want night vision tubes w/o the hassle of ITAR then your best bet would be DEP Photonis which is pretty much a merger of both the French and Dutch electro optics industry. They provide tubes to the Chinese and Russians too. Since they're the only game in town besides Uncle Sugar their tubes will be priced accordingly but the XD4 is a solid Gen II tube. The XR5 isn't (on paper) the equivalent of the latest Omni VII or whatever intensifiers but I wouldn't discount them either. Naturally both can be throw in whatever NVD setup- either PVS14 type monocular, a fancy ANVIS dual tube which will set you back at least 5 to 6 grand or even the PVS7 or LUCIEs where it's two eyepieces running through the single tube. Keep in mind hunting with them generally runs afoul of the law in a lot of places unless the area you live sez it's kosher for pest control.

>>16794
As I understand it, it is acceptable up here to use on wildlife that is not a game animal with a designated season etc...

But regardless, my desire to get this is for the Feral Dindu Apocalypse rather than shooting prairie dogs or some shit.

>>16782
Newcon Optic is out of Canada, their sets use either Photonis Gen 2 SHP or Russian Gen2/3 tubes and they sell just tubes.
The Russian tubes may or may not be economical but they come in every common size (Including PVS-7, and MX10160/ANVIS/PVS-14 size)

>>16769
>>16789
Ah same place I snagged an MX-10160 ANVIS with a very minor blem (acceptable for service) tube for sub $900, still 215 is pretty good for a blem tube, PVS-7 tubes have dropped in price pretty nicely so the prospect of finding a non blem for under $600 is likely.

Also for builders out there I feel the need to point out Wolverine tactical, it was tremendous resource for PVS-14 parts for my build.
http://www.wolverinetechnologiesllc.com/index.html

Also anyone bothered getting their shit purged or is it not worth it?

>>16671
You planning on picking up an IR laser to go with your setup now?

>>16701
>Been awhile since I perused the TNVC IR laser page
Wait how has the CQBL jumped to the $800 region??? When I picked one up it was in the sixes (when they were relatively new).
Even the Class 1 ATPIAL has jumped in price.

Has there been another cheap n' decent mono selling like hotcakes? I remember when the Gen2+SHP GT14's were sub 2k

>>16873
My first PVS-7 I did, the blemish isn't that bad and it's and either an Omni IV or V tube so it seemed worth it for $75 plus shipping.

>IR laser
>IR laser
>IR laser

Feast your eyes on my NIB PAQ-4C that I bought for $500 about 5 months ago and totally forgot to post about it

Even came with the cleaning q-tips still in their original bag and the manual in pristine condition.

>>16876
Very nice.
What's the deal with PAQ-4C's anyway? Did they come after PEQ-2's?
When I was in my unit went from PEQ-2's straight to peq-15's
What are the issues of the PEQ2 and PAQ in comparison and to the new Peq15/ATPIAL?

>>16940
>What's the deal with PAQ-4C's anyway? Did they come after PEQ-
2's?

Before.

>What are the issues of the PEQ2 and PAQ in comparison and to the new Peq15/ATPIAL?

Less features, weighed more, took up more room on a rail, I would imagine cost to the Govt may have been less(?).

>>16947
*more cost for PEQ-2 than a PEQ-15

Pac4 was purely a aim pointer, with remote and on-housing switch. Intended originally for standard M16 use. I think the C variant brought use of remote switches.

Peq-2 brought a more rugged combination IR laser/illumination aiming system. You had caps that you could use to either change pointer styles for identification of say, a squad leader's aim point for where you should be shooting, as well as multiple intensity and settings with regards to laser, laser+illuminator, or laser, laser+illuminator in non-eyesafe full power mode. You had adjustable focus for the illuminator and as it was aimable as well, you could tighten its beam down and use it as your aiming point if your primary laser broke or got occluded or something.

Things got cheaper once that shit was figured out, then the 15 came along and combined multiple features with even more modern technologies to facilitate what you have today.

>>16677Where did you get the o-ring for the rear cover? I can't seem to find it anywhere.

>>18248
eBay. But after searching I'm having a hard time finding one there, or anywhere now.

Also I got 2 more PVS-7 bodies a few months ago for my 2 remaining tubes. One I'm going to give to my dad for his birthday. I'll post pics later.

>>18249
I did some further checking around, it turns out that TNVC carries it but it's not listed on their site. You'd have to call to order that part specifically. It's called a 'Main Housing O-Ring' and their price is $6.

>>18251
I've seen it as "quad ring" before too.

Pvs-7D bodies with B objective assemblies. $350 each complete on eBay. My dad is getting the one on the right.

I'm also giving him my least blemished tube. It's only an OMNI III though so the gain isn't as good as my others. But where we live there's always eternal twilight to provide a good NV experience.

Not bad at all. I really need to get me some more intensifiers for backups. My current setup is a PVS-7B, Rhino 2, riding on a Ops Core Fast Bump,and a TNVC Mohawk MK1 counterweight bag in Multicam Black.

>>18256
What's your current tube?

My dad couldn't have been happier. It's his 60th birthday today. He's a former DoD/Civilian Department of the Navy employee. He saw a MIRV test off the coast of Cuba in the early 80s. Currently works as a HVAC engineer.

(No batteries in PVS-7 in pic)

>>18258
MX-10130C/UV Gen 3

>>18258
Nice! I have a blemished tube from a PVS7 given to me by a friend in law enforcement. I've tried bidding on dead PVS7's and parts but the stateside sellers reject it for Customs teasons (itar). I keep trying anyways, hope to luck out eventually.