-  [WT]  [Home] [Manage]

[Return] [Entire Thread] [Last 50 posts] [First 100 posts]
Posting mode: Reply
Name
Email
Subject   (reply to 108123)
Message
File
File URL
Embed   Help
Password  (for post and file deletion)
  • Supported file types are: GIF, JPG, PNG, WEBM
  • Maximum file size allowed is 5120 KB.
  • Images greater than 300x300 pixels will be thumbnailed.
  • Currently 1056 unique user posts. View catalog

  • Blotter updated: 2017-02-04 Show/Hide Show All

PBE Shield Stickers and Deagle Boltface Patches On Sale Now!



File 154730295918.jpg - (1.25MB , 3008x3004 , 1547102040516.jpg )
108123 No. 108123 ID: b6e91c
I wish guns didn't cost so damn much as a hobby.
My city is being gentrified so jobs are getting shittyer and rent is going up. And since gentrification means your comunity gets replaced with well off liberals, all these new voters are making voting to make all kinds of new fees and taxes on anything gun related.

Post guns you wish you could afford.
Expand all images
>> No. 108124 ID: bbee29
File 154731471373.jpg - (1.36MB , 2976x1674 , SUVuurwapen.jpg )
108124
>can't afford
L-39 but an S-18 would be fine too
>> No. 108125 ID: bbee29
File 154731506347.jpg - (1.67MB , 4863x2672 , _MG_5523-2.jpg )
108125
Most nice rifles chambered in 450 Rigby are going to be out of my budget for a while.
>> No. 108126 ID: bbee29
File 15473153734.jpg - (1.20MB , 3264x2448 , wm_3125312.jpg )
108126
Valmets are pretty.
>> No. 108127 ID: bbee29
File 154731639520.jpg - (103.76KB , 800x510 , 800px-HN-Bofors-40mm-2-2.jpg )
108127
Last but not least, a Bofors.

honorable mentions
>gucci AR15 builds
>gucci AR10 builds
>double rifles
>quality SXS
>S&W performance center revolvers
>> No. 108128 ID: e56201
File 154732388433.jpg - (255.68KB , 1956x966 , VSS-Vintorez-2.jpg )
108128
Yes, it's because of SOC.
>> No. 108129 ID: e56201
File 154732404076.jpg - (1.06MB , 1500x1124 , P1030168.jpg )
108129
Also because of SOC. I hear it's not really that great of a gun but I love the look.
>> No. 108130 ID: 9dcda2
File svd.webm - (4.26MB )
108130
>>108123
I'd love to have a SVD. Especially if they made a ~18" barrel version with a 20 round magazine. My buddy has a standard Tigr in 7.62x54R and it's really nice. It's actually a lot lighter than you'd expect.
>> No. 108131 ID: 9dcda2
File svd_pistol_4.webm - (2.96MB , svd pistol_4.webm )
108131
> Hey man, you wanna shoot it like a pistol?
> Yes I do.
>> No. 108132 ID: 9dcda2
  Probably my dream gun would be a MP5SD.

In fact, if someone made a semi-auto clone with a 16" barrel and mock suppressor, I'd buy the fuck out of it and use it for a PCC.
>> No. 108134 ID: e56201
File 154735682475.jpg - (101.15KB , 1600x650 , rus2.jpg )
108134
Also, do airguns count? I've wanted one of these for years, and technically I COULD afford it, but I can't quite bring myself to drop ~2500 on the gun+glass+filling method just to pop starlings and english sparrows.
>> No. 108136 ID: fe0cf7
File 154743149416.jpg - (291.65KB , 1800x1450 , US trooper in Vietnam sniper Carlos 'White Fe.jpg )
108136
Would love to have a Vietnam War era Remington 700 or Winchester Model 70 sniper rifle with a Hi-Lux or Unertl scope, but they are crazy-expensive.
Yeah, I know there are plenty of modern scopes far better than the old and obsolete Unertl scopes, but I like these old optics.
>> No. 108137 ID: 9dcda2
  >>108123
Only $16,100 at auction. My dream BAR would be an Ohio Ordnance Works HCAR with a deep blued finish, full-auto closed bolt trigger mech, and chambered in some lighter caliber in the 6.5 to 7mm range.

I've got a HCAR and it's fucking awesome. It's incredibly loud with the surefire muzzle brake, but hardly recoils. With a lighter cartridge, it would be even better.
>> No. 108138 ID: 9dcda2
  Ian is living the dream.
>> No. 108139 ID: 9dcda2
  I don't know about the walking fire tho.
>> No. 108140 ID: 9dcda2
  Me.
>> No. 108166 ID: 5c87e8
File 154779174437.jpg - (74.65KB , 400x388 , smells-bad-man_knowyourmeme_com via 9gag and inspi.jpg )
108166
I'll never be able to afford the kind of large mobilized artillery I fetishize. I'll never let off all eight 0.50 barrels at the same from my P-47. I will never BBBBRRRRRTTTTTT out of a gun barrel. I'll never be in the conning tower of a battleship when it fires a full broadside at that other battleship halfway hidden under the horizon. I will never turn the polished brass crank of a gattling gun and listen to it not quite drowning out the war cries and thundering hooves of a surprise attack by indians on horseback.
I will never never
>> No. 108218 ID: dec0ec
File 154943492778.jpg - (48.31KB , 600x249 , 600px-Ka-mk153-3.jpg )
108218
I really wish I could fire the SMAW again. It was just to much fun letting a rocket fly out. Although the 5-6k per rocket would suck. Also A Guestav would be fun to own and operate too even though I have no clue how to use it.
>> No. 108219 ID: 9d5275
File 154947581223.jpg - (180.35KB , 1148x844 , Swedish Carl Gustav M2 84mm recoilless rifle.jpg )
108219
>>108218
You could probably figure it out.
Hopefully the instructions are not printed in Swedish.
>> No. 108220 ID: 9dcda2
File 154950792658.png - (158.73KB , 1100x737 , screen_shot_2014-08-18_at_2_45_22_pm.png )
108220
>>108218 >>108219
The Swedish are well known for their easy to understand instructions.
>> No. 108221 ID: dec0ec
File 154951042124.jpg - (136.46KB , 1024x768 , wm_5270941.jpg )
108221
>>108220

Well luckily most single use and multi-use rocket launchers have "dumb" proof direction on the launcher or on the rocket.
Although I have see too many people try and use them backwards.The only thing i wish the put on things in bold letters is that it is recoiless so they don't anticipate the shot and put the rocket in the ground.
>> No. 108265 ID: 0adccc
File 155035485879.jpg - (615.64KB , 2560x1920 , Mitrailleuse-p1000723.jpg )
108265
An LMG-25, or honestly, any of Adolph Furrer's designs. Parts are unobtanium to even attempt building a semi, and its really the last big piece missing from my Swiss guns collection, but itll never happen.

Any of the protoype Swiss semi-autos like the Sk-46 or Ak-44 where they jammed a semi-auto action into a K31.

And of course, the VSS.
>> No. 108351 ID: 2635f4
File 155308529230.png - (482.54KB , 894x497 , Screenshot 2019-03-20 at 08_32_12.png )
108351
Go big or go home. This thing plus ammo for the launcher. If only if only...
>> No. 108377 ID: 51b0a9
File 155416616456.jpg - (187.05KB , 2000x1200 , HARP-Arizona_1966.jpg )
108377
>Post guns you wish you could afford.

Here you go-
>> No. 108381 ID: bbee29
https://www.northernelitefirearms.ca/products/firearms/20-mm-lahti/

FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUCK
>> No. 108383 ID: 51b0a9
>>108381

They'll shake your fillings loose.
Ask me how I know.
>> No. 108385 ID: bbee29
>>108383
I've shot that exact rifle before, it's a hoot. I actually contacted the previous owner to check if he wasn't in some sort of trouble, I didn't expect him to sell it.

Thankfully he's ok and just funding other projects.
>> No. 108386 ID: a067fa
>>108381
>>108385
How would you feed something like this in the long run? I see it comes with reloading dies, but won't the cases wear out after a while?
>> No. 108387 ID: 6fe1bd
>>108386
20x138b cases are relatively easy to lathe-turn, so are the bullets. Handloading isn't too bad either, 50 bmg primer pockets for CCI#35 work but we found they needed a bit of help with a small teabag of FFFF black powder under the stout load of vit 20n29. IIRC it was ~650 grains, but I may be off on those numbers, it was a while ago. Top it off with a cotton ball and a bullet.

14.5x114 is a bit more complex because of what country I live in, brass is harder to find. I have a source for steel cases and I treasure the brass cases dearly, I haven't seen any since I nabbed the ones I got years ago. You can't really turn 14.5 cases easily like you can 20mm, too much bottleneck. Theoretically, you could turn and form them after, but I don't have much experience with that kind of forging and I'd be worried trying this sort of thing out on my PTRD.
>> No. 108393 ID: 67cd4b
File 155451104272.jpg - (124.16KB , 904x600 , bullets, Finnish WW2 Lahti 20x138mm anti-tank rifl.jpg )
108393
>>108387
I have heard stories of people who found old crates of this stuff for cheap, but I imagine the pickings are scarce now.
- Finnish WW2 Lahti 20x138mm anti-tank rifle rounds
>> No. 108394 ID: 51b0a9
File 155451162749.jpg - (195.64KB , 1946x1134 , SIG_44_-16.jpg )
108394
SiG 44-16.
A WW2 era high cap single action based on the P-210.

Not only do I want one, I want one with many mags. To use in semi-casual three gun matches.
>> No. 108396 ID: 67cd4b
File 155451188378.jpg - (141.43KB , 1024x740 , Finnish WW2 Lahti M-39 20x138mm anti-tank rifle ad.jpg )
108396
Finnish WW2 Lahti M-39 20x138mm anti-tank rifle ad, $275, Shotgun News, 1983.
>> No. 108397 ID: 51b0a9
>>108396

You are not missing much. Lots of noise, a kick about like a high dram 12 gauge, and a blue streak toward the target.

Now, the 2CM FLAK30 was a hoot. Stomp the pedal, and all kinds of fun sprung forth.
>> No. 108398 ID: 67cd4b
File 155451564595.jpg - (204.86KB , 1280x960 , German WW2 20mm FlaK 30 Flakvierling AAG Imperial .jpg )
108398
>>108397
Never seen that one advertised in the Shotgun News or fired at any range I have been at or seen in videos. The German/Swiss Solothurn S-18/1000 20mm ATG seems to be a lot more accessible and popular among big gum enthusiasts.

- 2 cm FlaK 30 Flakvierling light anti-aircraft gun at the Imperial War Museum.
>> No. 108399 ID: 67cd4b
File 155451647366.jpg - (1.93MB , 3264x2448 , German WW2 20mm FlaK 30 Flakvierling AAG Finnish u.jpg )
108399
German WW2 20mm FlaK 30 Flakvierling AAG in Finnish use.
>> No. 108400 ID: 67cd4b
File 155451666536.jpg - (573.55KB , 1920x745 , German WW2 Panzerbuchse Solothurn S18-1000 20x138m.jpg )
108400
Another gun for the big belted 20x138mm round is the German/Swiss WW2 Panzerbuchse Solothurn S18/1000 anti-tank rifle.
Blurring the boundary between man-portable ATRs and bigger ATGs.
>> No. 108401 ID: 51b0a9
>>108398

Yeah the Si-1000 is easier to find, but boring.
Get a FLAK. Trailer mounted,optical sight, and if you have the dosh, well, "big sandy AA shoot". you are in. Pay a couple of kids to load and feed mags, and keep the pig fed.
>> No. 108402 ID: 67cd4b
File 155451678350.jpg - (113.20KB , 1500x960 , German WW2 Panzerbuchse Solothurn S18-1000 20x138m.jpg )
108402
But they also came with these handy trailers you could drag around. Because the rifle weighed 118 pounds.
>> No. 108403 ID: 67cd4b
File 155451685327.jpg - (269.95KB , 1500x913 , German WW2 Panzerbuchse Solothurn S18-1000 20x138m.jpg )
108403
Swiss Solothurn S-18-1000 20mm Anti-Tank Gun
Another Swiss anti-tank weapon – the Solothurn S-18/1000. This semi-auto gun has a short barrel recoiling mechanism of operation. It is chambered in 20x138mmB cartridge like the Lahti L-39. Another similar design feature with the Lahti is the ratchet crank charging handle which is designed to make it possible to manually pull the bolt back. The Solothurn S-18/1000 is fed from 10-round detachable box magazines. The carriage has a provision to store spare magazines right next to the wheels. This gun is consigned with 13 magazines and a number of spare parts and tools. https://www.thefirearmblog.com/blog/2018/10/30/7-historical-anti-tank-weapons-seen-in-morphy-auctions-catalog/
>> No. 108404 ID: 67cd4b
File 155451725731.jpg - (254.45KB , 1500x730 , Finnish WW2 Lahti L-39 20x138mm anti-tank rifle se.jpg )
108404
Finnish Lahti L-39 20mm Anti-Tank Rifle
Another well-known WW2 anti-tank weapon is the Finnish Lahti L-39. This rifle is a gas-operated semi-auto magazine fed weapon. It is chambered in 20x138mmB. The magazine is installed from the top of the rifle and the spent cases are ejected downwards. Like many other weapons of this type, it was widely used in WW2, however, its effectiveness against the majority of WW2 tanks left to desire a lot. That’s why such weapons were more effective when used in anti-materiel roles.

This particular gun comes with the distinctive Lahti ski-style bipod attachment and a number of accessories including 8 magazines, 4 magazine boxes, cleaning kit, spare parts, tools, three rounds of ammunition etc.

Estimated price: $5,000 – $10,000
>> No. 108405 ID: 67cd4b
File 155451774741.jpg - (184.16KB , 1280x770 , Finnish WW2 Lahti 20x138mm anti-tank rifle 4.jpg )
108405
>>108401
"Keeping the pig fed" on WW2 20mm ammo can get pretty expensive. Even Browning fifty fodder is expensive nowadays.
>> No. 108406 ID: 67cd4b
File 155451890672.jpg - (251.76KB , 1920x1080 , antique flintlock grenade launcher hand mortar gra.jpg )
108406
Sadly, the only big bore gun I have is a reproduction flintlock grenade launcher (aka hand mortar) with a 2.5-inch (63.5mm) bore and a .75 powder chamber. The necked-down powder chamber will accommodate patched Brown Bess balls if you want to use this for some sort of pistol. Normally, she was designed to fire tennis balls or solid rubber dog toy balls. Silly, but the ammo's cheap.
Previous models were made to load 1.75" golf balls.
>> No. 108407 ID: 67cd4b
File 155451946224.jpg - (196.31KB , 1024x768 , antique flintlock grenade launcher hand mortar 2_5.jpg )
108407
Can be used as a "less-lethal" rubber ball riot gun if the need arises.
Or a way to discipline kids who get in your stuff.
>> No. 108408 ID: 67cd4b
  Can Cannon https://youtu.be/L1f6Ip3dHPI
Looking for some summer fun? Get the Can Cannon from X Products. I've never had as much fun on the range. This beast shoots Coke cans and tennis balls, and works on an AR-15 lower.
>> No. 108409 ID: 67cd4b
File 155452021262.jpg - (89.19KB , 900x675 , US AR-15 Can Cannon by X Products loads Coke cans .jpg )
108409
Best Fun-Gun Ever. The Can Cannon – Mounts on AR-15 - by DAVE HIGGINBOTHAM on MAY 10, 2015
The Can Cannon: http://www.xproducts.com/ar-15-soda-can-launcher-accessories-launcher
Though it look intimidating, it is the best fun-gun ever.
Awesome has arrived. That’s the slogan emblazoned on the side of the inconspicuous tube in which the Can Cannon ships. And X Products–specialists in all things awesome–have nailed this one. I’ve never had more fun on the range than I did with the Can Cannon. Never. Not once.

What is the Can Cannon? It is exactly what it sounds like. This is a highly modified AR upper designed to shoot 12oz cans. Coke cans. Beer cans. Whatever. And full cans, not empties. And, coincidentally, it also shoot tennis balls and other items similar in diameter. Simply pop off your upper, transfer over the bolt carrier group and charging handle, load a mag full of blanks and get to a range with a lot of open spaces. Wide open spaces.

And brace yourself. The Can Cannon kicks–but odds are you won’t notice. You’ll be laughing too hard.
https://www.gunsamerica.com/digest/best-fun-gun-ever-the-can-cannon/
>> No. 108410 ID: 67cd4b
File 155452028150.jpg - (63.86KB , 900x675 , US AR-15 Can Cannon by X Products loads Coke cans .jpg )
108410
The concept is simple enough. Replace your AR-15 upper with the Can Cannon. It uses the same bolt and everything. Instead of loading live rounds into the magazine, fill it with blanks. Any .223 or 5.56 blank should work. They won’t cycle the action, but they’ll launch the hell out of a can of Coca-Cola.

The tube itself is a beefy piece of steel that threads over a device designed to use the pressure from a blank to push a can out the end of the tube. X Products calls it a gas ported barrel.

The launching tube screws directly onto the upper, and sits flush with the upper’s rail section. It is stepped inside, so that a can sits in the optimal position (bottom end in first).

Load in a can, cycle the bolt, aim in a VERY safe direction, and pull the trigger. Don’t get this order mixed up and load it, then stick your hand in front of the barrel. That’s not safe.
>> No. 108411 ID: 67cd4b
File 155452033334.jpg - (38.83KB , 900x675 , US AR-15 Can Cannon by X Products loads Coke cans .jpg )
108411
The tube is blocked on this end. This is the small detail that would make shooting a live round dangerous/deadly.

Potential dangers
Let’s get this out of the way now. Before I wax poetic about how much fun I have had with this thing, I want to talk about the very real dangers it poses. This device shoots projectiles. It is built on a rifle platform, uses blanks, and propels objects at potentially deadly speeds.
>> No. 108412 ID: 67cd4b
File 155452041457.jpg - (100.83KB , 900x675 , US AR-15 Can Cannon by X Products loads Coke cans .jpg )
108412
When I first heard about the Can Cannon, I’d envisioned a video opening that went something like this: I would set up the camera on a long range and holler to someone down range–“Throw me a beer!” The shooter would then lob a can of beer my way and I’d catch it, crack it open, etc.

Um. This is why you should always test out guns and such in a very safe place. When we first pulled the trigger on a can of Coke Zero, it launched the can so fast and so far that we barely saw it go. There’s no way I am going to try to catch a can shot out of this thing. It is a stupid idea.

That is only one of the stupid things one might do with it. There’s little to prevent you from loading a live round into this. And if you pulled the trigger on a live round in the Can Cannon, it would fire. If I had two, I’d test what happens. But I’m not willing to destroy this one for something I know is a stupid idea. The round would conceivably blow through the end of the gas tube, then whatever object you’d placed in the Cannon itself. It could also generate enough pressure to rupture the whole thing, though I doubt it. Regardless, don’t do it.

And don’t shoot at anyone with it. We played around with some tennis balls, but only from a really long distance. And I wouldn’t recommend that. Those fuzzy balls are moving very fast.
>> No. 108413 ID: 67cd4b
File 155452054052.jpg - (110.58KB , 900x675 , US AR-15 Can Cannon by X Products loads Coke cans .jpg )
108413
How fast is fast? We did chronograph this thing, with cans and balls.

Let’s begin with a point of reference: a baseball, which weighs 5.25oz, traveling at 95mph has 99 foot pounds of force.

Baseball 5.25oz, 139.33fps or 95mph, 99fpf
A can of Coke Zero 13.08oz, 134.4ofps or 91mph, 226.4fpf
Tennis ball 2.1oz, 175.70fps or 120mph, 63.1fpf
In order to get 226.4 foot pounds of force from a baseball, you have to throw it at 143.67 MPH. The tennis ball has less mass–only 2.1oz–and only 63.1 foot pounds of force–well below major league pitching danger, but still smoking fast.

How far will it shoot?
Surprisingly far. We could get cans well over 100 yards. Tennis balls are more of a gamble. They lose their fuzz as the blanks burn them out of the barrel. Each shot trims the fuzz, and the balls seem to slow a bit more as the gas seal formed by the tight fit gets less secure.

We shot the balls and cans on a completely flat plane and were surprised to find that the cans were averaging about 130 yards. Tennis balls were over 100 yards, but didn’t have the momentum of the cans, so they came up shorter.

I should mention, too, that only good cans work. As we try to keep our costs low, I’d bought a case of Dr. Thunder. The Can Cannon didn’t like Dr. Thunder. The pressure popped the bottom of the cans. They didn’t go very far at all. The did erupt in a shower of gas-fueled generic sugary splendor, one that coats everything with a 25 foot radius–cameras, by standers, even the shooter if the wind is right.

But duct-tape fixes everything. A simple patch on the butt of a Dr. Thunder can gave it the strength to clear the barrel. With the quick fix, the cans flew just like the others. No can survived the impact of the launch.
>> No. 108419 ID: e56201
>>108409
I bought one of these uppers last year and still haven't shot it. I guess I should now it's warm out.
>> No. 108450 ID: c5a8c3
File 155619187123.jpg - (35.11KB , 1000x565 , DanuviaVD01.jpg )
108450
i want to dual wield this kawaii gun but i'll never even regular wield.
>> No. 108476 ID: 21a752
File 155707523674.jpg - (494.11KB , 3322x1575 , antique Austrian Schuetzen 8_15x46R rifle by Johan.jpg )
108476
Always liked the schuetzen stocks on single-shot target rifles. These flamboyant stocks aren't just decorative, they can fit your cheek and arm extraordinarily well! Martini, Winchester Highwall, Marlin, Sharps or any good falling block action works well with these schuetzen stocks. But they are old, rare and expensive. Some gunsmiths do make modern schuetzen target rifles, but not for cheap.
Here is a very nice Schuetzen rifle in 8.15x46R which was made by Johann Peterlongo of the well-known firm Tiroler Waffenfabrik in Innsbruck, Austria. The date of manufacture is assumed to be November 1908 due to the "11.08" stamped on the bottom of the barrel. The 29.5" octogonal barrel has a bright and shiny bore, an 8.75" long dovetail, and retains about 95% of the original bluing. The action is of the Martini type with double set triggers and retains about 20% of the original casehardening colors. The front sight has the original ramped base, but the sight blade has been replaced with a Lyman 17A target sight. The rear peep sight seems to be complete and functional. Both sights retain about 95% of their original finish. The buttplate finish is about 98%, but it most likely has been reblued. The buttstock and forend appear to be made of some type of European walnut. This rifle was made for a right-handed shooter, and as such the stock has been substantially sculpted with a cheekpiece on the left side and a thumbrest on the right. The wood is finished with varnish or shellac (not polyurethane) and polished to a high gloss. There are a number of handling marks in the wood, but nothing substantial. I would give the wood about 98%. Weight is 11.2 lbs. https://www.gunsamerica.com/917144324/Schuetzen-Rifle-8-15x46R.htm
>> No. 108477 ID: 76bf0b
File 155707620941.jpg - (851.14KB , 3500x1650 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108477
VALENTIN KERN SCHUETZEN RIFLE – 8.15X45R
This magnificent rifle was made by Valentin Kern in Germany, late 1800’s to early 1900’s. It is a style known as a Schuetzen rifle, which was used in competitive offhand target shooting at various distances, usually 200 meters. This fine single-shot, falling block-action rifle is chambered in 8.15x45R, and features an elaborately engraved stock and color case hardened receiver, a 29-inch octagon barrel, double set triggers, and an integral, case hardened butt hook. https://www.egunner.com/valentin-kern-schuetzen-rifle-815x45r,name,12488019,auction_id,auction_details
>> No. 108478 ID: 21a752
File 155707629074.jpg - (304.25KB , 3500x2345 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108478
>> No. 108479 ID: 21a752
File 155707632273.jpg - (123.82KB , 2048x1860 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108479
>> No. 108480 ID: 21a752
File 155707636279.jpg - (179.55KB , 2980x2247 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108480
>> No. 108481 ID: 1665ef
File 155707651411.jpg - (346.10KB , 2624x3423 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108481
The levers on these schuetzen rifles actually make good pistol grips. Hope the legislatures don't ban these late 19th century target rifles because of that.
>> No. 108482 ID: 1665ef
File 155707654146.jpg - (210.34KB , 2499x2921 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108482
>> No. 108483 ID: 1665ef
File 155707657060.jpg - (696.87KB , 3434x2624 , antique German Valentin Kern Schuetzen rifle 8_15x.jpg )
108483
>> No. 108484 ID: 21a752
File 155707753364.jpg - (458.62KB , 2880x1600 , antique German Buchel Meister schuetzen rifle 8_15.jpg )
108484
Buchel Meister Schuetzen Rifle chambered in 8.15x46R and was originally shipped some time in the 1920s.
https://www.turnbullrestoration.com/gun/restored-german-gun-buchel-meister-schuetzen-rifle/
>> No. 108485 ID: be2bfd
File 155707757563.jpg - (617.97KB , 2852x1620 , antique German Buchel Meister schuetzen rifle 8_15.jpg )
108485
>> No. 108486 ID: 1665ef
File 155707765780.jpg - (801.14KB , 2430x1620 , antique German Buchel Meister schuetzen rifle 8_15.jpg )
108486
>> No. 108487 ID: 1665ef
File 155707769939.jpg - (658.05KB , 2430x1620 , antique German Buchel Meister schuetzen rifle 8_15.jpg )
108487
>> No. 108488 ID: 1665ef
File 155707771941.jpg - (663.61KB , 2430x1620 , antique German Buchel Meister schuetzen rifle 8_15.jpg )
108488
>> No. 108489 ID: 1665ef
File 155707774470.jpg - (849.83KB , 2430x1620 , antique German Buchel Meister schuetzen rifle 8_15.jpg )
108489
>> No. 108490 ID: 99d841
File 155707862046.jpg - (1.16MB , 2770x1700 , antique US Remington Rolling Block Husqvarna model.jpg )
108490
22 K – Hornet husqvarna Model 33 action
Here is my favorite Gopher Gettin’ Machine. It is commonly known as a “separator” in the gopher fields! The action is from a Husqvarna model 33, Fagelstudere’, means “Bird Rifle” The originals were built for hunting a Swedish grouse type bird called a capercaillie. I wanted to copy an early European style hunting rifle for this project. The barrel is actually stainless and blued with a special process. Engraving is by Larry Merical, good friend of mine. I actually have a pair of these rifles, both actions purchased from Larry. The other is a 38-55, my deer rifle, also engraved by him. The scope is a Leatherwood, copy of the old Malcoms, 4 power. I shoot 45 grain Hornady bullets, groups are just under one inch at 100 yds. This a very fun rifle for stalk and shoot in the gopher fields. https://www.customrifles.us/22-k-hornet-husqvarna-model-33-action/
>> No. 108491 ID: be2bfd
File 155707874750.jpg - (486.55KB , 2816x1054 , antique US Remington Rolling Block Husqvarna model.jpg )
108491
Looks like a Remington Rolling Block.
>> No. 108492 ID: be2bfd
File 155707877273.jpg - (748.33KB , 2809x1550 , antique US Remington Rolling Block Husqvarna model.jpg )
108492
>> No. 108493 ID: be2bfd
File 15570788255.jpg - (1.99MB , 2816x2112 , antique US Remington Rolling Block Husqvarna model.jpg )
108493
>> No. 108494 ID: 1665ef
File 155707997839.jpg - (405.68KB , 2500x1250 , antique German George Nobauer schuetzen rifle _22L.jpg )
108494
GEORGE NOBAUER PASSAU, SHCUETZEN RIFLE, 22LR, Double Set Trigger, Martini Style Action, 28 1/4" Octagon Barrel, Diopter Rear Sight, Sculpted Cheekpiece, Swiss Style Butt Plate. MFG: 1920.
https://www.gunsinternational.com/guns-for-sale-online/rifles/single-shot-rifles-german-austrian/schuetzen-rifle-mfg-george-nobauer-passau-22-lr-28-1-4-octagon-barrel-.cfm?gun_id=101131167
>> No. 108495 ID: 1fd17d
File 155708006186.jpg - (272.02KB , 2500x1594 , antique German George Nobauer schuetzen rifle _22L.jpg )
108495
>> No. 108496 ID: 1fd17d
File 15570800888.jpg - (563.84KB , 2500x1837 , antique German George Nobauer schuetzen rifle _22L.jpg )
108496
>> No. 108497 ID: 1fd17d
File 155708011145.jpg - (471.71KB , 2500x1748 , antique German George Nobauer schuetzen rifle _22L.jpg )
108497
>> No. 108498 ID: 1fd17d
File 155708013010.jpg - (535.53KB , 2500x1671 , antique German George Nobauer schuetzen rifle _22L.jpg )
108498
>> No. 108499 ID: 76bf0b
File 155708017095.jpg - (174.34KB , 2034x1568 , antique German George Nobauer schuetzen rifle _22L.jpg )
108499
>> No. 108500 ID: 76bf0b
File 155708019732.jpg - (483.34KB , 2500x1880 , antique German George Nobauer schuetzen rifle _22L.jpg )
108500
>> No. 108501 ID: 76bf0b
File 15570802178.jpg - (273.70KB , 2034x1896 , antique German George Nobauer schuetzen rifle _22L.jpg )
108501
>> No. 108502 ID: 76bf0b
File 155708024348.jpg - (308.02KB , 2500x1782 , antique German George Nobauer schuetzen rifle _22L.jpg )
108502
>> No. 108503 ID: 76bf0b
File 155708026765.jpg - (413.07KB , 2470x1964 , antique German George Nobauer schuetzen rifle _22L.jpg )
108503
>> No. 108504 ID: 1fd17d
File 155708270894.jpg - (349.95KB , 2816x748 , antique US Remington Rolling Block _38-55 heavy be.jpg )
108504
And here's some kind of king-hell Remington Rolling Block...
Rifle build – 38-55 black powder cartridge Heavy bench gun
Follow the build of this 38-55 BPCR, black powder cartridge rifle, from start to finish. The action was an original Remington rolling block number 1 military action which I heavily modified. I copied a rifle action design found in Roy Marcott’s Remington sporting rifle book. This action had Arabic markings I couldn’t live with. I milled down the sides of the receiver to clean it up and polish to bring it to the size of a sporting model 1 1/2. I also added a spur on the left side to accommodate the breech seater tool used to breech seat bullets, as was the custom in the hey day of turn of the century target rifles. The trigger guard is English style from muzzleloader days and the trigger is a “speed lock” design. I welded up the half cock notch and stoned the full cock notch and hammer sear to give me a 1 1/2 pound trigger. This is a primitive trigger set up, copied from original rifles. Because there is no fly added to the hammer, the half cock notch is essentially removed. This makes it possible to set the single, simple trigger very light. Since this style rifle is only used for target shooting, the half cock safety notch is not necessary. The rifle is set up for iron sights from MVA, and a Lyman Super Target Spot 30 power scope. On my home range I have shot numerous 1 inch 5 shot groups at 200 yards. However I never seem to be able to shoot perfect scores in a match, I always manage to send one into the hinterlands when it really counts.

The barrel on this behometh came from the home shop of John Kreiger, by his own hand. He had machinery capable of handling the 2 1/2″ blank which was not available in the factory. I was aiming for a 50 pound finished rifle, however it is fairly light at only 38 pounds. When set up on the bench I shoot with a 9 pound muzzle clamp attached, bringing total weight to 47 pounds. The only weight limit in schuetzen bench rest requires the competitor must be able to place the rifle on the bench without assistance. After receiving the blank I milled it octagon to 2.150″ at the muzzle. The barrel would not fit in, on, or under my shop lathe. I needed the assistance of my good friend John King to chamber and thread for me. Then I commenced to turn this piece of heavy machinery into a rifle. https://www.customrifles.us/custom-build-38-55-black-powder-cartridge-heavy-bench-rifle/
>> No. 108505 ID: 99d841
File 155709049456.jpg - (128.16KB , 1024x296 , antique US Remington Rolling Block _38-55 heavy be.jpg )
108505
Here's some shots of it before finishing and engraving.
>> No. 108506 ID: 99d841
File 155709055590.jpg - (195.41KB , 1024x445 , antique US Remington Rolling Block _38-55 heavy be.jpg )
108506
Looks like a schuetzen-style grenade launcher.
>> No. 108507 ID: 99d841
File 155709057935.jpg - (154.72KB , 1024x347 , antique US Remington Rolling Block _38-55 heavy be.jpg )
108507
>> No. 108508 ID: 99d841
File 155709083566.jpg - (173.49KB , 1024x414 , antique US Remington Rolling Block _38-55 heavy be.jpg )
108508
But the charm of the old Remington Rolling Block is the thin minimalist lines of this handy half-stock breech-loading rifle from 1864.
>> No. 108509 ID: 99d841
File 15570909701.jpg - (72.18KB , 2400x1350 , antique percussion US heavy barrel half stock benc.jpg )
108509
Here's an American Civil War era (ca. 1865) heavy barrel half stock percussion bench heavy barrel target rifle for comparison.
>> No. 108510 ID: 99d841
File 155709139215.jpg - (286.26KB , 2071x1000 , antique US Remington Rolling Block Model 1874 no_ .jpg )
108510
This Remington rolling-block rifle is chambered in .22 caliber Black Powder, an early production S/N 71X made in 1890. It sports a 24 1/2 in. tapered octagon barrel. It is a model 1873 rolling block #4. The walnut stocks are old original with nicks, scratches, and wear. The receiver and barrel patinated, the bore is very good condition without pits. It wears a semi-buckhorn rear sight and the blade front mount is present without the blade. An excellent choice to introduce a young (or not so young) shooter to cowboy style plinking. https://www.lofty.com/products/remington-rolling-block-22-caliber-rifle-1-ql5z5
>> No. 108591 ID: 51b0a9
File 155710087387.jpg - (58.23KB , 600x389 , Stoner63lmg-1.jpg )
108591
Yeah.Example one
>> No. 108592 ID: 51b0a9
File 155710154268.jpg - (171.97KB , 1500x1001 , 10495112_822716454419830_6045346825550822798_o.jpg )
108592
>>108591
And Example two. Save, that I've worked on this one. And know it well.

This is a M4A3E2, Sherman Jumbo, a "Heavy" version of the M4A3 Medium. It has more effective armor than a PzKfwVI, and a far more useful gun. (And a far, far more useful and reliable engine.)

I know this tank. It took a solid hit from a PaK 40, and shrugged it off. The shot took a large divot from it's drive housing, which was later filled with weld. Meanwhile, the tank and it's justifiably pissed off crew decided that "Running the sons of bitches over" was the best course of action.

Mind you, this thing just soaked up a shot that normally would have turned a "normal" M4A3 into a firey wreck. A PaK 40 is no slouch.

But a "Jumbo " is no average tank.
It took the massive hit, MG'd the crew and crushed the gun.

It was sold recently from the Littlefield collecton. It spent some time in Arizona in the late 90's.
>> No. 108593 ID: 1665ef
File 155710388329.jpg - (306.30KB , 1510x742 , German WW2 75mm Pak 40 anti-tank gun 3.jpg )
108593
>>108592
Impressive! The PaK 40 75mm is one of the best anti-tank guns of WW2.
As reports came in on the development of new Soviet tanks, Germany looked to improve their late-1930s era 50 mm anti-tank gun. The result was the 75 mm PaK 40 (PanzerAbwehrKanone), not only bigger but also significantly heavier. The new gun was built in only small numbers until the months after the invasion of Russia and actions in North Africa, when the need for such a weapon increased dramatically among German army units.

The powerful PaK 40 was an effective weapon against most types of Allied tanks, including the Soviet T-34 and American Sherman. The weapon, along with the famous 88 mm, was considered one of the best anti-tank guns of the war. https://flyingheritage.org/Explore/The-Collection/Germany/75-mm-PaK-40-Anti-Tank-Gun.aspx
>> No. 108594 ID: 1665ef
File 155710391872.jpg - (1.07MB , 2741x977 , German WW2 75mm Pak 40 anti-tank gun 2.jpg )
108594
Because light and strong metal alloys were needed elsewhere in German war production, the PaK 40 was produced primarily from steel. Gun crews had difficulty repositioning the weighty weapon quickly and long moves always required a vehicle. Some of the guns, mired and snow and mud, were abandoned by retreating German units on the Eastern Front, captured, and used by the Soviets. Other PaK 40-type guns were mounted to highly mobile tracked chassis as German Marder tank destroyers.

In a pinch, the PaK 40 could be operated by one soldier. Normal gun crews consisted of five or more men working to service the cannon behind its angled gun shield and fold-down skirt. More than 20,000 PaK 40s were produced and German military units used the PaK 40 through the last days of World War II.
>> No. 108595 ID: 1665ef
File 155710396590.jpg - (278.88KB , 1280x960 , German WW2 75mm Pak 40 anti-tank gun 1.jpg )
108595
General Statistics
Weight: 3,141 lbs
Weight in Draft (with accessories): 3,306 lbs
Elevation: -5 to +22 degrees

Armament
Muzzle Velocity: 3,248 to 2,598 ft/sec
Maximum Range: 8,310 yards (HE), 2,190 yards (AP)
Theoretical Rate of Fire: 12 to 15 rounds/min
Practical Rate of Fire: 10 rounds/min
>> No. 108596 ID: 51b0a9
>>108593

Google "PAK 40 Youtube", and chances are you see the one I dealt with. Ian has a vid of it, firing at Flatiron mountain a bit west of Phoenix.
>> No. 108597 ID: 1665ef
File 155710444435.jpg - (327.65KB , 1280x853 , German WW2 75mm Pak 40 anti-tank gun in Finnish se.jpg )
108597
75 mm PaK 40 anti-tank gun at the yard of Mikkeli Infantry museum.
>> No. 108598 ID: 1665ef
File 155710485633.jpg - (323.33KB , 1280x853 , German WW2 75mm Pak 40 anti-tank gun in Finnish se.jpg )
108598
That station wagon better watch its ass since it probably does not have the seven inches (177mm) of armor of the 84,000 pound Sherman M4A3E2 Jumbo.
>> No. 108599 ID: 21a752
File 15571048925.jpg - (364.31KB , 1280x853 , German WW2 75mm Pak 40 anti-tank gun in Finnish se.jpg )
108599
75 mm PaK 40 anti-tank gun outside RUK-museum in Hamina.
>> No. 108600 ID: 21a752
  Jumbo Sherman M4A3E2 https://youtu.be/drUhB-hsgGQ
>> No. 108601 ID: 21a752
  Damn, nearly all the YouTube videos about the Sherman M4A3E2 Jumbo are video games like War Thunder or World of Tanks. Oh, well...
TIGERS WORST NIGHTMARE - Jumbo Sherman (War Thunder Tanks Gameplay) https://youtu.be/qk_QrWv_6Rc
>> No. 108602 ID: 21a752
  Pak-40 German 75mm AT Gun Firing https://youtu.be/T7fhBm1ouSU
While we normally stick to small arms here, this beast of a gun was just way too impressive for me to not pay attention to. I was at a cannon and machine gun shoot just recently where some folks brought out what is (I believe) the only functional Pak-40 in the United States. And shot it.

The Pak-40 was the backbone of German antitank guns during WWII, and fired a 75mm AP shell out to an effective range of about a mile in a direct-fire role, with enough energy to defeat pretty much any Allied tank except the late-war Russian heavies. It was fairly light weight given its effectiveness, and makes one hell of a concussion when fired.
>> No. 108603 ID: 51b0a9
>>108602
That is the one the Hamiltons restored, firing at Flatiron mountain, west of Phoenix.
>> No. 108604 ID: 1fd17d
File 155710743912.jpg - (759.56KB , 2751x1185 , German WW2 75mm Pak 40 anti-tank gun 4.jpg )
108604
http://silverhawkauthor.com/artillery-preserved-in-canada-german-second-world-war-trophies_415.html
54 posts omitted. First 100 shown. [Return] [Entire Thread] [Last 50 posts] [First 100 posts]


Delete post []
Password  
Report post
Reason