|
>>
|
No. 106663
ID: 9affbd
File
151461587152.jpg
- (449.97KB
, 1328x747
, rsz_120171228_133446.jpg
)
After doing builds for everyone from helping the armorers over a decade ago to helping kids blast their re-up bonuses and building them for friends, I finally completed a custom build for myself. It's admittedly heavy, but it's a real tack driver and everything I wanted. I'm planning to build an SBR upper once I have the budget (and paperwork).
Specs
-Freefloated 20" heavy barrel with a 1/8 twist
-M4-72 comp.
-Seekins adjustable gas block feeding into a melonited rifle length tube
-Heavy buffer
-Heavy NiB bolt with FAL style sand cuts
-Custom engraved dust cover detailing the recommended ammo specs on the inside and the outside detailing chambering, barrel length and that it has an H-buffer
-Ambidextrous Radian Raptor charging handle
-Ambidextrous bolt release and magazine release
-Ambidextrous safety with a 60 degree throw
-Trigger smoothed by yours truly with a 3.5lb pull and hardly any over-travel (feels like breaking a thin icicle when firing and the reset is very short)
-Faxon M-lok handguard
-Magpul ACS stock and Magpul grip with grip core containing a spare bolt and firing pin
Currently has a cheap $20 bipod (Harris is on order), Primary Arms 3x compact scope with ACSS reticle on an American Defense quick release mount and a Surefire Helmet light mount (the FDE thing at the muzzle end of the top rail).
Sorry for the long post. I've enjoyed seeing everyone elses builds for years, so I'm excited to show mine off.
|
