Looking for a hard case, pelican, skb, etc for my girlfriends rifle. Anyone have an extra lying around?
check used scuba stores.
i have one, but shipping would be expensive.
Where are you located?
Mayflower UW CHEST RIG GEN IV in Ranger Green - Lightly used 95% - $175 Shipped CONUS
Safariland 1.5" Drop Low-Ride Universal Belt Loop - Like new - sku 6075UBL-2-2 - $15 Shipped
KCI Glock Mags - 3 niw 1 opened but new - 4 for $30 shipped
Unknown 3 slot MOLLE mag pouch - $10 Shipped
Seekins precision sp223 billet lower.
I fired 600 rounds with it.
Comes with ambi bolt release (really nice for rightys, too) and some paint on it.
$200 shipped to your ffl. I'll entertain trades, too.
Ishapore 2A .308 bolt rifle for sale. Has a lol2000 yard rear sight setting unlike the more common 2A1's 800 yard sight. Basically a No. 1 Enfield mkIII design modified for 7.62 NATO. Produced in the 1960's in India. wikipedia told me the buttplate is from their copy of the FAL, and that it's the last bolt rifle produced for standard infantry use in the world(excluding sniper shit)
coolguy innawoods gun, 12 round detachable mag and more PC appearance with wood stock. Rated for 7.62x51, I only used commercial .308 in it, 150gr iirc. Less recoil than my bullshit r700 I'm also selling. I didnt shoot it enough to quote accuracy, but the sights seem true.
Some of these rifles have been cleaned up, refinished and often turned into jungle carbines where they cut down the barrel and put a flash hider on it. This isn't one of those, the finish is this terrible enamel paint type thing. It looks cool but comes off easy and doesn't protect the gun much. The gun itself is in fine shape for a 60's rifle, with a fine bore; I bought it for a hunting rifle but now I'm selling my two .308's for a more hunting-oriented upper for the AR.
I tried to make a block for the magazine to limit capacity to FL legal 5rds for innawoodz deer, and then the mag would push the rounds stacked on the left-side too far to the right to feed into the chamber, I had to push the bullet down to be able to ride the bolt home. I took out the block and couldn't get the failure to happen again, but as the redneck rule of thumb goes I wouldnt trust my life with it.
wysiwyg, sans the cartridges if shipped. $300 american sheckels, includes shipping. Locally, I will take even less, North/Central Florida.
Maybe a trade for an Aimpoint M2 or M3. Or a 6.8 AR15 upper.
I dont think so. If you want I can ship the gun to your FFL with no clipazine and you can just buy a '10 round' one online. For any local buyers, the ammo is no longer included, i pew pew'd it all up.
honestly you almost had me,.... but i got my last on for $200 i see them at gun shows now and then for $400 but they never sell $300 is just too much for me right now
$200 is a DEAL, $400 not so much but really because the market. As a tool, the ishy makes a terrific conscript weapon, similarly priced firearms are rarely chambered in such a potent caliber.
I still haven't put it on the main gun traders because I like it so damn much; just shot it again this past weekend. But I would like to sell it to a deserving OPERATOR to help fund an Aimpoint.
Since OP sold his rifle, I don't mind mentioning there is an Indian 2A1 for sale in Santa Maria on the calguns for-sale section for $400. Comes with bayonet and a few handfuls of ammo. Its not mine, I'm just trying to help you find a gun you're looking for.
Its been listed for a month with no bites, I'll bet you could get it for a little less than $400 you're you're decent at haggling. He's even taking trades.
Mint condition south african uniform.
- 1 Light jacket L size
- 1 Heavy Jacket L size
- 1 Boonie hat 61
- 1 Belt '70
- 2 Corporal Brassards, 2 major rank epaulettes, 2 pins, 1 skill badge
Also, I gift 2 XXL pants to whoever buy this, it could be useful to use them as patches if you ruin your uniforms.
Payment through paypal.
100 dollars plus shipping. I'm in Europe.
20 bucks. This is not a joke.
water? Or is it full of hot air?
He doesn't accept ebt, so piss off.
CMMG dedicated lower
"Tactical assault" upper, now gorilla manufacturing.
Comes with 5 mags.
Looking for a 5.56 or 7.62 rifle.
Located in Washington.
Will ship buyers dime.
Just putting it out there for shits and gigs
Meant in trade each shipper would pay own shipping.
Trade value 800
$260 Shipped, discreet paypal prefered
FACTORY REFURBISHED. Does not have the limited edition box.
>Limited to a production run of 1000, each model is individually numbered and features a 20th Anniversary medallion. The side panels are created from a unique, limited edition “Applejack” finished wood. As with the rest of the Master Series line, the LG-994 features a compact laser diode, which allows them to be compatible with ambidextrous safeties. Designed to fit 1911 and 1911A1 full-size frames with grip screws measuring 3-1/16” apart
Still available but I'm headed back out on the road so I can't ship for a few months. I'll post again when I'm home to ship.
So ive had a Vortex PST thinking it was what I needed. Turns out a red dot was what worked better for SBRs IMO. Its held in a GG&G qd mount which holds zero fine. MOA turrets and reticle.
Anyone want to trade? I'm also looking for used 14.5 inch non pinnded M-4a4 type uppers.
Email me, pd.
Pinned 14.5 inch uppers are OK so long as it is a YHM suppressor that will fit my Phantom stainless.
I meant to say "YMH suppressor adapter".
Getting rid of a few things in order to simplify life and make some dosh.
First Up is an AR15 Upper. 14.5" Bravo Company SOCOM profile Barrel with a pinned YHM Flashider and Low-profile Gas Block which was also pinned. Over it is a Daniel Defense RIS II handguard. This is the original version of the handguard with the vented bottom panel in front of the gas block instead of the newer version which lacks the vent holes.
Has a few minor scuffs from use (approx 500rds of quality 5.56 and .223 ammo)
Asking 800 OBO
full disclosure, BTW.
The 1" velcro strap that goes over the leftmost pouch is missing.
I'm sure you could get a replacement from SKD or make another using the one on the right as a template
P99 is sold
Upper still there?>>9216
Still have the chest rig?
My chance do you still have the armatus plate carrier?