So ive had a Vortex PST thinking it was what I needed. Turns out a red dot was what worked better for SBRs IMO. Its held in a GG&G qd mount which holds zero fine. MOA turrets and reticle.
Anyone want to trade? I'm also looking for used 14.5 inch non pinnded M-4a4 type uppers.
Email me, pd.
Pinned 14.5 inch uppers are OK so long as it is a YHM suppressor that will fit my Phantom stainless.
I meant to say "YMH suppressor adapter".
Getting rid of a few things in order to simplify life and make some dosh.
First Up is an AR15 Upper. 14.5" Bravo Company SOCOM profile Barrel with a pinned YHM Flashider and Low-profile Gas Block which was also pinned. Over it is a Daniel Defense RIS II handguard. This is the original version of the handguard with the vented bottom panel in front of the gas block instead of the newer version which lacks the vent holes.
Has a few minor scuffs from use (approx 500rds of quality 5.56 and .223 ammo)
Asking 800 OBO
full disclosure, BTW.
The 1" velcro strap that goes over the leftmost pouch is missing.
I'm sure you could get a replacement from SKD or make another using the one on the right as a template
P99 is sold
Upper still there?>>9216
Still have the chest rig?
My chance do you still have the armatus plate carrier?
Just sold my P7 PSP for $1,000. I bought it originally for $700. So great deal, right? Just saw one sell on gunbroker for $1,500. :(
sup goatbee. moved your thread to /trade/
I shot one of those recently at a local rental range. It was...interesting. Typical awful H&K trigger, recoil was a little stiff, but it was very flat shooting. It felt like the future, circa 1970. I want to try a double stack M13 now.
I just wish I had priced them better before selling. Seller beware, lol.
P7 popularity is exploding right now.
Look at the thread below, sold mine in under 24 hours.
Title says it all. Comes with 1.5" belt loops. I no longer have an m&p.
$30 shipped. I'll trade for a couple of pistol hsgi taco pouches or similar, i can add cash on top.
Lower prices than most places retail, all NIB. Trying to convince my boss that counter sales aren't the only way to sell guns.
I've got all M&P models,many glocks, CZs, FNs, Springfield Xd, XDs, XDM, XDM 5.25 comp, 1911s from RIA, springfield, GSC, STI, etc. I've got rugers, kel-tecs. Damn it operators if you want I've got it.
So tell me what you're in the market for and I'll make it happen at a reasonable price.
Only thing I can get at the moment that's close is the Silverback 01994 and you'd be looking at $1,660.
I've got a 75b in stock for $499, The RO gonna run you about $790.
Any chance you've got a Tavor in 5.56 with 9mm kit, right hand preferably green or tan?
Also a CZ-75 SP01 (my range buddy wants one after shooting mine)
Shipped prices on a Beretta 92A1 and a Mossberg 590A1?
Gave my brother my Glock 30 Gen 4 .45 for Christmas.
Looking to replace it.
Also, Marlin Model 60, synthetic preferred.
Sorry if this is a necro-bump, but I'm trying to find an XDS 3.3 in 9x19. Everywhere online is either sold out or super expensive and my area inflates prices by like 200+.
Selling my MSA Sordin Supreme X's with gel cups. Bought them two years ago new and haven't really used them much since I prefer low profile plugs instead.
I have two extra mounting solutions for a Remington 700. One is a Midwest industries one piece rail for a short action 700. The other is a 2 piece leupold base that I used on my short action, but I believe will work on a long action as well.
Free with shipping.
just sort of putting this one out there as a feeler.
it's in black and comes with the box and everything the stock came with. i think the wrench to replace the butt pad is missing, though. i'll include the improved buttpad as well.
$210 shipped. i can do $100 along with an ARK defense enhanced sopmod or a vltor imod, though. (for mil spec buffer toobs obviously)
i'll take new pics once i get the stock off the gun.
>ARK defense enhanced sopmod or a vltor imod, though.
also shit's gotta be in black.
bumping. $180 shipped.
also changed the email. contact me here instead if interested.
fucking gen2 release. Now $150 shipped. Add $10 for a buffer spring and an h2 buffer!
Sup guys. Sellin my glass. Great set but I realize im more of an RDS kinda guy. The package comes with:
-The scope itself, with the box & case candy. MRAD reticle. A few external scratches from innawoods use.
-The appropriately-sized Vortex brand Switchview lever. The magnification rings on Vipers are tight as fuck.
-A Burris PEPR mount. QD attachment, 30mm. Also a bit lightly scratched.
You will get all this for $500 shipped. If you are in the Seattle area proper i can do a little bit more off the price & mount this on for you too.
More pics to follow!
got home and took some pics. then i napped and remembered to put em up.
holla at cho boy.
S O L D
Looking for some backup iron sights. Nothing Chinese made. Preferably metal. Anyone have anything lying around?
I have a black Magpul rear BUIS that is just sitting in a box. Shoot me an email and it's yours.